LOWE‘S验厂是对以下11个部分进厂打份，各部分的分值比例如下表：

以下为LOWE‘S劳氏验厂11个部分评分项目，供参考：

1、Factory Attributes 工厂特性

1. Is the premises well maintained?工厂有妥善维持吗

2. Is equipment well maintained? 工厂设备有保养完善吗

3. Is general housekeeping acceptable (clean and tidy)? 厂内整洁是可被接受的吗(干净)?

4. What was the average on-time delivery performance in the last 12 months?在过去12个月准时出货的平均值 100~98.1%(5)98~96.1%(4)96~94.1%(3)94~92.1%(2) 92~90.1%(1)90% or lower(0)Not Available(N/A)Transportation method ____ %air，______ % vessel.

5. What was the average outgoing quality performance (Lot Acceptance Rate) in the last 12 months? 在过去12个月出货质量表现100-96.1% on time(5)96-92.1% on time(4)92-88.1% on time (3)88-84.1% on time(2)84-80.1% on time (1)Not Available(N/A)

6. Do they have CLEAN, STACKED, COVERED, PROTECTED FROM DAMAGE storage area for keeping raw material and packaging materials? 有干净,可覆盖, 有保护的区域来置放保存原料及包装材料吗?

7. Is the lighting over the work area throughout the factory meets PRC National Standard GB50034-2004? 工厂的工作区域有灯吗(符合PRC National Standard GB50034-2004)

8. Is there efficient production flow from raw materials to finished goods? 

从原料到制成成品有高效率的生产流程吗?

9. Is the Factory proximity to major highway and port? 工厂邻近主要公路及港口吗Easy to access and within 150 km (5) 150km内可到达 A bit difficult to access or between 150 km and 300 km (3) 150km到300kmDifficult to access or exceeds 300 km (1) 超过300km

10. What is the production supervisor to worker ratio? 工厂管理者跟员工的比例 25 or less to 1 (5)26~30 to 1 (4) 31~35 to 1 (3)36~40 to 1 (2)41~45 to 1 (1)Greater than 45 to 1 (0)